How To Make A Paper Mache Head – I made some head decorations for Halloween 2019 using paper mache and clay and a bunch of other materials. They are fun! Here’s how I made them…

I started with a few styrofoam heads I already had lying around; A man and a woman. I bought these ages ago for some project or other; I can’t remember what it was specifically because I used it for a million different things – as a face representation of something I was working on, as a base for other Halloween gifts I made, etc. The head was a little beat up and stained here and there from another project, but that wasn’t a problem for this project.

How To Make A Paper Mache Head

I decided to make a dozen heads for starters. My plan is to use each styrofoam head as a reusable base, making several copies of each.

Papier Mache Figure Hi Res Stock Photography And Images

To prepare the styrofoam heads, I wrapped a plastic bag around each of them and then used a mask here and there to pull the bag tight, so they wouldn’t slide around. The plastic will act as a release agent for the paper mache; The paper mache will stick to the bag but the bag won’t stick to the head, so when each head is done I can cut it open and easily remove the paper mache shell from the styrofoam head.

Yes, this looks like a photo from a killer blog. Well, it’s only going to get worse from here…

After doing a few of these I realized it helps to make sure the corners of the bag are on

Head, not front and back. With corners on both sides, you can pull them straight back and close them. If there is an angle to the forehead, it can create a bad ball shape.

How To Make A Papier Mâché Giraffe: 9 Steps (with Pictures)

I quickly and obliquely applied five layers of paper to each head. You can read about my maché technique and information here. The short version is: I used Roman PRO-543 Universal Wallpaper Adhesive (paid link) and alternating layers of newspaper and brown wrapping paper.

Usually I’m very careful when applying paper mache, because I want to create a nice texture and avoid wrinkles and visible edges, but in this case I’m happy to throw the paper on awesome, for a few reasons: 1. Since this is my The decorations were for a Halloween party, I knew they had to be put in low light and no one would see them up close. 2. I know I have to cover the front of the head with more detail for the face, and the back of the head will be covered with fake hair. 3. They are completely spoiled and to kill!

I usually do alternating layers of newspaper and brown wrapping paper, but for the head too I cheat by using cheap c-fold towels, each torn into two or three large strips. For each head, I made a layer of newspaper, then three layers of c-fold paper towels, and then a layer of brown paper to finish. Applying layers of paper towels only takes a few minutes – I wish I could work on all my projects faster! But really you can avoid such shortcuts only when you live

On a nice smooth surface. The tissue gets wrinkled and lumpy in some random places, and there’s no way to avoid that if you work quickly with large strips. That doesn’t matter at all for this project, which is good!

Paper Mache Stag Head Diy

I used one head as an experiment, using wood instead of several layers of paper mache; It works great! You can read about it here.

I also did an experiment with Elmer’s photo paste on the ends of the hair; You can read about it here. These heads are getting less powerful, so I added an extra layer on each of them.

For each head, I don’t bother covering the bottom of the neck, as I will work on this area later to create a sort of effect neck.

For each head, I would do my paper macho in the morning and then let the head dry outside in direct sunlight all day. I would turn my head every few hours to make sure the sun was hitting them everywhere. With direct sunlight and dry air, the head will dry completely after about 24 hours. If we get a cloudy day I’ll still be out; They dry faster than indoors. But I will give them two days to dry completely.

Day Of The Dead Papier Mâché

When everything was 100% dry, I carefully cut out the head with an x-acto knife and removed the foam cover. You can remove the plastic bags at this stage, but I chose to leave them in; It sounds silly but the thin layer of plastic makes the head a bit smaller. I reattached the paper mache halves with masking tape and applied another layer of paper mache over the tape.

In the end, I had half a dozen male heads and half a dozen female heads that were more or less identical; Ready to start adding all the white stuff…

I stuffed a lot of crumpled newspaper into the heads to make them a little more stable for the next step. Note: For some heads I have to do some different steps; For example, for the head where I want to insert eyebrows, I need to fill in the head and then close the neck.

I cut the neck slightly with scissors to create jagged lines in several places like torn flesh. I cut each neck a little differently; Some longer than others, and some with fancy/diagonal shapes.

How To Make An Adorable Papier Mâché Bunny

I cut a disc of foam to put in the neck. I want this to go about 3/4″ deep into the neck, so I can leave a little more of the neck “skin” than the neck stump. Make sure there’s enough tape to hold the disc in place I know (so it not come in), and then I put the tape on the tape

I made a spine piece out of a piece of foam and put it in place.

I then added two layers of paper mache over all of these pieces; Edges of neck, inside of neck, etc. While doing this, I added some squished-up paper and paste to make random little bumps on the flat disc, just to make it look a little sticky. -Not like meat on top and a clean flat disc.

Let’s start with the ears. Are ears part of the face? This discussion is for people smarter than me.

Diy Paper Mâché Pulp Bowl

To make the ears, I started by tracing 24 ear balls on a board (salt storage box) and cutting them out. Whenever I do several things I count each item to help me keep track of it; In this case I have odd numbers for the left ear and also for the right ear.

Easy Ears for Them Using Paper Clay – This is my first time using paper clay, and it’s interesting! I’m used to modeling clays like Activa Plus Air Dry Clay, and this form of clay is a little different. Paper clay is a bit difficult to work with, and oddly not very sticky, so it doesn’t want to stick to my pasteboard pictures. No big deal! I let the clay dry overnight, and in the morning it had shrunk a bit – this happens with many types of clay – and the substance was unbound by the pasteboard. No problem, I quickly put them all back together with my hot glue gun.

Then I covered all the ears with just one layer of paper mache. They look so cute for so easy! This is only half of them; I make them a dozen at a time.

I hot glued the ears in place of the head, and then I added some paper mache to ease the attachment in front of each ear; I added some small squished paper and pasted it in front of the ear to fill in the empty space like a corner and then I covered the area with several layers of paper.

Large Paper Moon Paper Mâché Head Stock Photo

I added eyebrows to a few heads; I just covered some ping pong balls in a layer of paper mache (to make them easier to paint) and let them dry.

I cut holes for the eyes in the paper mache head shape (obviously I did this before the neck holes were closed), glued the eyes on

How to make paper mache animals, how to make a paper mache star, how to make paper mache paste, how to make paper mache glue, how to make a paper mache rabbit, how to make a paper mache giraffe, how to make a paper mache head, how to paper mache, how to make a paper mache snake, how to make paper mache, how to make paper mache crafts, how to make a paper mache pinata