How To Draw 3d Block Letters – Learn how to draw perfect 3D blocks by following these simple steps. Next, we will show what the shadow will look like. Check out this tutorial, I think you’ll learn a lot! Good night!

Learn how to draw 3D block letters with shadows on the wall – Step by step drawing tutorial

How To Draw 3d Block Letters

Well, in the picture above I have given 3 different examples of how to shade the letters. Whatever you do, be consistent. If all the dark shadows are on the sides of one letter, make sure all letters have dark shadows on the sides. If all the shadows are on the bottom of one letter, make sure all the letters show it. Either way, if the shadows are consistent, the character looks three-dimensional.

How To Draw A 3d Letter

For the third row, the lighting comes from above, from the right side… just like the top row, the light is slightly higher and to the right.

Add shadows to the left and below each edge with these letters. It will look realistic in 3D.

This is much more complicated than the previous two examples. As can be seen from example “F” above. You need to turn your shadow stick down and to the right. The first shadow in the examples is, if the letter is angled, the shadow is less angled than the second letter in each example. A second example of each letter is a letter on a table or flat surface. Use each example given to help draw these shadows. After drawing these shadows, try them out on your 3D characters. Please let me know if you need a full tutorial on this shader example.

Technorati Tags: 3d letters, 3d letters, bubble letters, drawing bubble letters,  block letters, letter shading, shading letters, 3d letter drawing, lower case letters, block letters drawing

How To Draw 3d Letters: Create Lettering That Pops!

We use cookies to give you the best experience on our website. If you continue to use this site, we will assume that you are satisfied. Ok We use cookies to make it great. By using our site, you agree to our cookie policy. Cookie settings

This article was co-authored by Staff. Our team of trained editors and researchers check articles for accuracy and completeness. Our content management team closely monitors the work of our editorial team to ensure that each article is backed by rigorous research and meets high quality standards.

If the article receives enough positive comments, it will be marked as approved by the reader. In this case, 85% of the readers who voted for the article found the article useful and received Reader Approved status.

3D block letters are perfect for headlines, posters and birthday cards. It is not difficult for them to learn how to draw themselves. Draw a block letter by making a rectangular outline around the simple letters. Add perspective with diagonal lines to make it 3D, then add shadows to make your characters appear realistic.

D Letters Drawing

This article was co-authored by Staff. Our team of trained editors and researchers check articles for accuracy and completeness. Our content management team closely monitors the work of our editorial team to ensure that each article is backed by rigorous research and meets high quality standards. This article has been viewed 1,140,276 times.

To draw 3D block letters, start by drawing a bold font in the center of the paper with a pencil. Then put an “X” in the upper left or right corner of the paper. Next, draw a line from the edge of your letter to the “X” and don’t forget to draw a line at the outermost corner of your letter. Once you’ve drawn the lines, use them as a guide to create thick dimensions for each letter. Finally, erase the pencil lines and outline the final image with a black pen or marker to make it stand out. Read on for tips on how to draw Pyramid Heroes! This article and the images within may contain affiliate links. If you make a purchase through my link, I may earn a commission at no additional cost to you.

3D letters may seem complicated at first, but with a little theory and a little practice, you’ll learn it in no time.

So even if you are an inexperienced beginner, after following this tutorial you will learn how to draw basic 3D characters.

How To Draw 3d Block Letters

If you want to add color to your 3D characters, you can use these other tools –

I think it’s more important to have a basic understanding of what 3D characters are than to give them pre-made models that can be copied.

I believe that this will give you a solid foundation and that all subsequent exercises will be more effective.

Without getting into the science behind this artistic lettering tutorial, here’s a very simple and straightforward definition of what 3D is.

Learn To Letter In 3d

However, it is not the same thing. In short, a shadow is a dark area or shape formed by the body that lies between the light beam and the surface.

If you look closely, you’ll see that all angles connect to a complete 3D character. In contrast, the shaded letters indicate that they have been dropped behind the letters because they are not connected.

I’m not sure if this method has a special name, but I call it the 3D equal distance method.

Before we start showing you how to apply these effects to letters and words, let’s take a step back and try a simpler shape: a square.

D Letters Alphabet Vectors & Illustrations For Free Download

Draw a simple square on the paper with a pencil (it can also be a rectangle, it doesn’t matter).

It can come from any direction, and for this example I’ll extend it to the bottom right.

Make these lines a little longer and remove unused lines later.

If I had decided to orient the 3D image to the lower left, I would not have added a line to the upper right corner.

Lettering Archives · Art Projects For Kids

The next step is to determine how deep our 3D goes, and that’s up to you.

The first line you draw will determine the depth, which will be the same elsewhere.

You can start from the bottom or from the side. I prefer to do it from the bottom up.

So I’m going to align my ruler to the bottom line of the square and slide it down a little like this.

D Name Drawing

The most important step here is to ensure that the final line of the 3D shape follows exactly the direction of the original shape.

After I close the bottom line, I need to turn the ruler vertically and line it up next to the square.

Following this technique, which we have seen in the example of a simple square shape, we can easily apply it to other objects (characters).

Important – For beginners, it is better to start learning 3D with lowercase letters. Once you understand how to use it correctly with block letters, it will be easier to create different letter styles with 3D effects.

How To Draw 3d Block Love Letters And 3d Block Love Letters Coloring Page · Art Projects For Kids

If you’re not familiar with it, I’ll talk more about it in my beginner’s guide.

I would avoid doing 3D vertically or horizontally as the effect is not very noticeable.

Before you draw your lines, try to define all the corners so that you don’t miss any angles.

I’ve done this so many times that I know where to place my lines, but if you’re just starting out and you’re overwhelmed, this will help.

Ways To Draw Bubble Letters

You can make these lines a little larger, and the ones that don’t fit will be removed later.

As you can see, we’re dealing with a lot of parallel lines here, so I like to use my rolling stock for that.

We have extended the line from each corner and now we need to close the shape to get our 3D shape.

I’m going to start closing these two lines, the lower points of the letter A.

How To Draw A 3d Letter With Drop Shadow In Procreate

I’m going to grab my ruler and place it next to the letter A and slide it into the corner I created in the previous step.

So I put my ruler on the bar at A, slide it into the corner and close the line.

Finally, I just need to attach the rest of the sides, and again, there’s a little corner at the bottom that tells me how far I have to go.

After I’m done connecting all the lines, all I have to do is remove the extras that go beyond our 3D.

Drawing 3d Letter J R Stock Vector Image By ©julydfg #6854994

Of course we can customize our 3D letters more, but I’ll cover that in the “Additional Tips” section.

Now all I have to do is decide how deep the 3D goes and then close the line.

You should consider the format of these closings, and it’s okay if it’s not 100% the same as the original line in the letter.

Me too

Black And White 3d Font Made With Thin Lines, Single Color Simple And Bold Letters Alphabet,

3d block letters font, how to draw 3d letters, 3d block letters generator, how do you draw block letters, drawing 3d block letters, draw block letters, 3d letters to draw, alphabet 3d block letters, how to draw block letters, how to draw a 3d block, how to write 3d block letters, 3d block letters